|Deposit to pay||£|
|Cost of loan||£|
|Total amount payable||£|
Seymour Duncan SH-13 Dimebucker Pickup
Instant Online Finance - get a decision in minutes - and goods delivered within 24-48 hours
View the finance options below to calculate your monthly and total payments for your purchase.
Simply select finance at the checkout, then choose your preferred option and complete your application form.
Finance Terms & Conditions
Applicants are required to be at least 18 years old, employed and UK resident for the last 3 years to qualify.
Home delivery orders, paid with finance, can only be shipped to the address used in the finance application.
Customers using our Click & Collect service will be required to present 2 forms of ID when collecting orders at store.
Click here for full details.
Massive metal tone dialed to the exact specs of Dimebag Darrell. Beef, crunch, edge, balls.
Crunchy pick attack, scooped mids, and just the right amount of saturation are what this pickup is all about. Dime wanted his signature humbucker to have a thick crunch that sags just a little when you really lay into it. Combine that with a full, tight, low end response, a ceramic magnet, with dual stainless steel blades, and you have the Dimebucker. Huge and straight from the brain of the late great Darrell Abbot. In a 2004 interview Dimebag described the tone of the Dimebucker, “Its very saturated not to the point where its overly fuzzy but it has a smooth and crunchy distortion tone. It will give you some extra gain, but it wont go so far that your sound breaks up and is going crazy. You get that warm tone with the distortion mixed in and it has the low end thats kicking you in the butt while the top end is cutting your face off in the right way, but not ripping your face off. If you ever listen to a Pantera record, that’s what you’ll hear through this pickup”. Combine with a 59 Model (bridge) in the neck position for the setup that Darrell himself used, or get our Dimebag Set for neck and bridge.
Hand built in Santa Barbara, CA, the Dimebucker uses a ceramic bar magnet, dual stainless steel blades, 4-conductor lead wire for multiple wiring options, and is vacuum wax potted for squeal-free performance.